3/8" Pitch 0.063" Diamond Concrete Chain Saw

Here is some information of diamond chain saw as below:
1. chain pitch: 3/8" and 0.45"
2. chain guage:0.063"(1.6mm)
3. chain saw inch:20-inch
4. chain length:72link/36segments, 64links/32segments, 
128links/64segments
5. one roll:100foot/30.4meters
6. material:high quality imported steel
7. weight:0.68KG/0.55KG/1.1KG
8. package: thick export carton
9. delivery: 5 working days 
10. OEM is accepted
11. Machine: ICS SAW, HUSQVARNA SAW


 

Chain Saw for Stone Features:

• Easy to use, simple operation and portable.
• Wide application, it can cut coal coating, concrete, reinforced
• concrete, pipe, brick, stone and wood etc.
• The long bar can cut into 350mm deep blind hole.
• Cutting concrete regularly, Dig holes in the wall.

Chain Saw for Stone Application:

• 450 mm deep cuts
• Deep cutting
• Precise cut of corners
• Irregular deep cutting perfect for small openings
• Adjustment to openings
• Pipe trenches
• Pipes
• Ventilation ducts
• Load-bearing beams installation
• Concrete, stone and masonry

Installation instruction and using tips:
1.To reduce chain stretch and tension downtime.
2.Oil the chain at the end of the use to prevent rust but be carefull not to over tension.
3.When pulling the chain around the bar by hand, do not touch it with thumb or forefingers, because the bar rails is very sharp. 
4.Grab only the Diamond segment.
5.Always pull the chain away from the wall walker, whose point is also pretty sharp.
6.Turn the engine off before tensioning the chain.