80W 100W Acrylic MDF CNC Laser Cutting Machine
|Payment Type:||L/C,T/T,D/P,Money Gram,Western Union|
|Terms of Trade:||FOB,CIF|
|Min. Order:||1 Set/Sets|
|Delivery Time:||7-12 Days|
|Packaging:||Packed with plywood case|
|Place of Origin:||Jinan, Shandong Province, China|
|Supply Ability:||100 sets/month|
Model No.: UT-1390
UTECH 80W 100W Acrylic MDF CNC Laser Cutting Machine
Introduction of machine cabient
1. Adopt the frame structure to weld the plates and sections into a whole, high welding strength and good anti-seismic performance;
2. All the plates and sections are made of galvanized products to prevent moist and rust during wet conditions, especially at sea.
3. Galvanized sheet welding difficult, long working hours, expensive materials, manufacturing costs higher than ordinary steel;
4. Worktable thickening, high strength and the use of the entire board to ensure the installation of flatness;
5. The support part of the machine`s bottom welded ribs plate to ensure support strength;
6. It is easy to move and reliable to support with the use of universal wheel and foot support.
7. The bottom of the machine welded ribs, and the gap between the ground large enough, hydraulic lift truck can easily enter from below to facilitate loading and unloading;
1. High stability laser tube,high quality lens and mirror,long life-span.
2. Automatic up&down table design satisfies the customers need of engraving thick materials.
3. Adopt advanced Ruida control system and easy to operate, international standard laser power supply,USB interface output can support off-line working.
4. Strong software function,compitable with Coreldraw,Autocad and so on.
5. Auto focus system,water pump,air pump and rotary attachment are optional.
It is widely used in mould industry, advertising, decoration, arts and crafts, electronic appliances, etc.
And It is widely used for engraving & cutting on wood, acrylic, PVC plastic, plexiglass, architectural models, rubber plates, bamboo products and so on.
UTECH Laser Parts
Reci Laser tube>>>
The power supply matched with the RECI laser tube is with the high quality and reasonable price. Its volume is very small. Installing it is also very easy for the user. It is also convenient to be used. Matching with the RECI laser tube would improve the performance of the laser tube and extend the life of the laser tube.
USB offline, English version, very easy to learn and operate.High speed USB data transmission interface, download speed is up to 500 KB/s.
Graphic format support: PLT,DXF, BMP, JPG,AI etc. SupportAutoCAD, CorelDraw, Photoshop output directly.
Having strong suction ,suitable for cutting and engraving soft material, like leather, cloth and so on.
Can withstand heavy material, can hold 200kg material,suitable for cutting and engraving hard material, like wood, acrylic and so on.
Laser chiller industrial chillers for an individual laser industry applications, mainly for laser equipment laser generator water cooling and control temperature of the laser generator, making the laser generator can work maintain normal operation. Laser equipment in the long run process, the laser generator will continue to produce high-temperature, high temperature will affect the normal operation of the laser generator, so the need water cooling to low the temperature.
Can add it on machine for processing cylindrical materials, divide into Chuck rotary and Roller rotary.
Automatic focus is that automatic focusing system automatically adjust the focus distance of laser head, according to the distance of the engraving and cutting materials, so as to achieve the best effect of engraving and cutting position. It is no need to adjust the distance by hand which is very troublesome. It is not only simple, convenient, and easy to adjust, but also with high efficiency.
Function: When customer cutting carving, you can use red dot for locating; You can first frame, red light can clearly mark the laser engraving machine line route; If there is a good pattern required micro-cutting laser cutting machine along the edge of the cut with red light can clearly identify the positioning size.
The power supply of the laser tube is divided into 40 W/60W/80W/100W/150W.It is used with the laser tube. Foe the RECI laser tube, it has own matched RECI power supply and laser tube bracket. The power supply matched with the RECI laser tube is with the high quality and reasonable price. Its volume is very small. Installing it is also very easy for the user. It is also convenient to be used. Matching with the RECI laser tube would improve the performance of the laser tube and extend the life of the laser tube.
Taiwan HIWIN rail guide or ABBA rail guide>>>
ABBA is attached to SKF, have some advantages,
1) Maintenance-free, low maintenance, no lubrication piping systems and equipment;
2) Long service life, long-term automatic maintenance of the track surface lubrication film protection;
3) Significantly reduce the cost of running oil;
4) Easy to maintain the machine clean, no waste oil leakage pollution of the environment at risk.
Working size: 1300*900mm(900*600mm, 1600*1000mm, 1300*2500mm, any size you need can be optional)
Laser tube power: 80w(100/130/150/180/280/300w optional)
Laser type: CO2 sealed laser tube,water-cooled,10.6um
Cutting speed: 0-40000mm/min
Laser Output: 1-100%software setting
Resetting positioning accuracy: ≤±0.01mm
Power supply: AC 110 - 220V ± 10%, 50 - 60Hz
Operating temperature: 0 - 45°C
Operating humidity: 5 - 95%
Min. shaping character: English 1.0mm x 1.0mm
Graphic format supported: BMP, PLT, DST, DXF
Software supported: Tajima, CorelDraw, PhotoShop, AutoCAD
Driving system: Stepper motor
Cooling mode: Water pump(water chiller CW3000/5000/5200/6000)
Min shaping text: English 1mm*1mm
Machine will be clean and fixed on the wood board, every auxiliary parts will be packed by film, laser tube will set in one independent box, and fixed by sponge. Then, machine will be surrounded by the film and air rubber film,after that, will packed by the standard export plywood. Finally, will surround by the metal line again. The machine will be protected well.
Q: In general, how long is the service life of a laser tube?
A: Generally, a laser tube`s service life can reach 5000 hours to 10000 hours depending on the specific usage. For example, if it works 8 hours per day, the detailed data is as follows:
1. If you set the power at 20-30% of the total power, the service life is about 1-2 years.
2. If you set the power at 40-50% of the total power, the service life is about 1 year.
3. If you set the power at 70-80% of the total power, the service life is about 8-10 months.
Q: How can I tell the power of a laser tube has been exhausted?
A: The beam color of a new laser tube in operation is purple. When the power is gradually depleted, the color will become white.
Q: Is it better to increase blow to improve laser processing performance?
A: For some thick materials, it works. But, when carving some other materials, you need to blow less.
Q: How long will it take to learn to operate a laser machine?
A: If you are able to use some basic graphic design software, it will only take a few hours to master the operation. You just need to do some simple tests on different processing materials to know how to set the correct speed and laser power.
Q: Is a laser machine in operation harmful to our bodies?
A: It is not harmful as long as the laser is not exposed directly to skin and eyes.
Q: What's the guarantee, in case the machine breaks down?
A: The machine has one year guarantee. If it breaks down, generally speaking, our technician will figure out what the problem may be, according to client s feedback. Parts except for consumable parts will be replaced for free, if the problems are caused by quality problem under "normal use".
Q: How's the payment? How long is the delivery time?
A: Our company accept payment item is T/T. 50% deposit, 50% balance before delivery. Other way we can have a communicate with each other.
For standard machines, it would be 3-7 working days; For non-standard machines and customized machines according to client's specific requirements, it would be 7-15 working days.
# 24 months guarantee of the whole machine, we will provide the consumable parts at an agency price when you need replacement.
# Main parts(excluding the consumables) shall be changed free of charge if there is any problem during the warranty period.
# Software is on update for free whole life.
# Our engineer could support you technology to your country if necessary.
# Our enginner could service on weekend even on vacation.
# Our engineer could train you in our factory for free.
# Our engineer could service you 24 hours online by Skype, Wechat, QQ, or by cellphone.
# English manual and CD video for machine using and maintaining will send to you with the machine.
Welcome to contact Sofia
Tel/Whatsapp/Wechat: +86 186 6371 6521
Shandong U-May CNC Technology Co., Ltd.
Shandong U-MAY CNC Technology CO.,LTD.Specializes in the research, development, production of CNC MACHINE. Our brand "WIN" "UTECH" hava a considerable reputation in the domestic similar products, which has been widely used in wooden furniture, advertising, craft gifts, packaging and printing, logo and etc. Our products have been exported to many countries and regions such as Europe, Russia, Asia, Africa. We are committed to the enterprise management philosophy "Integrity - based, constantly innovation,effective communication,quality services" and the goal of "Technical service customer", but also great attention to product design , manufacture , installation , adjustment. We will still try our best to maintain one stop professional service.
- Company Name: Shandong U-May CNC Technology Co., Ltd.
- Representative: Xin Li
- Product/Service: Cnc Router , Laser Engraving Cutting Machine , Oscillating Knife Cutting Machine , Fiber Laser Cutting Machine , Plasma Cutting Machine , Fiber Laser Marking Machine
- Capital (Million US $): 叁佰贰拾万元整
- Year Established: 2014
- Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
- Export Percentage: 71% - 80%
- Total Annual Purchase Volume (Million US $): US$2.5 Million - US$5 Million
- No. of Production Lines: 5
- No. of R&D Staff: 21 -30 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 1,000-3,000 square meters
- Factory Location: No. 6-8, Industry South Road, Licheng District, Jinan, Shandong, China (Mainland)
- Contact Person: Ms. Sofia
- Tel: 86-186-63716521
Premium Related Products